Glove Compartment Lid

Glove Compartment Lid

Removing






- Remove the glove compartment. Refer to => [ Glove Compartment ] Glove Compartment.

- Remove the hinge pin from the brake component. Glove Compartment Lid Brake Component.

- Set the glove compartment down with the top side on a soft surface.

- Drive the left and right hinge pins out using a 4 mm hex socket wrench - 1 - (or another suitable tool) - arrow -.

- Remove glove compartment cover - 2 - from the glove compartment.

Installing

Install in reverse order of removal.