Telephone Baseplate (R126)

Telephone Baseplate (R126)

- Turn off all electrical consumers.

- Remove the key.

Removing

- Remove the telephone handset (R37).

- Remove SIM card mount.

- Remove the storage compartment from the center console.

- Disconnect the connector - 1 -.






- Remove the bolts - 2 - on the back side.

- Push the Telephone baseplate upward out of storage compartment.

Installing

- Install in reverse order of removal.

Tightening specifications, refer to => [ Component Location Overview, through 10.31.2008 ] Component Location Overview, Through 10.31.2008.