Alarm Horn: Service and Repair

Alarm Horn

Removing






Vehicles through 05.08

- Unclip the plenum chamber covers - 1 and 2 - and remove them.

• Ignore - item 3 - and the - arrow -.

Vehicles from 06.08






- Remove the bolts - 3 -.

- Remove the clips - 2 - from the mounts and remove the plenum chamber cover- 1 -.

Continuation for All Vehicles






- Remove the nut - 3 -.

- Disconnect the electrical connector - 1 -.

- Remove the alarm horn (H12) - item 2 - upward.

Installing

• Tightening specification, refer to => [ Ultrasonic Interior Monitoring Overview ] Ultrasonic Interior Monitoring Overview.

Install in reverse order of removal, observing the following:

- Engage the retaining tab in the opening on the bracket.