Selector Lever Scale Illumination Bulb (L101) For Vehicles With Selector Lever Boots

Selector Lever Scale Illumination Bulb (L101) for Vehicles with Selector Lever Boots

Removing

- Move the selector lever into N.

- Turn off the ignition and remove the key.

- Remove the frame - arrows - for the selector lever boot - 1 -.






- Fold up the selector lever boot.

- Remove the cover for the selector lever - 1 - from the middle console and lift this upwards - arrows -.






- Remove the selector lever cover.

- Disconnect the connector.

- Release the retaining springs - arrows - and remove the trim frame with the selector lever scale illumination bulb - 2 - from the selector lever cover - 1 -.






Installing

Installation is in reverse order of removal.