Selector Lever Transmission Range Position Display

Selector Lever Transmission Range Position Display

Removing






- Position selector lever in N position.

- Switch off ignition and remove ignition key.

- Unclip mounting frame for selector lever boot - 1 - from center console and lift it upward - arrows -.

- Fold selector lever boot upward.

- Unclip selector lever cover frame - 1 - from center console and raise it up - arrows -.






- Remove the selector lever cover.

- Unplug connector.

- Release the retaining springs - arrows - and remove the trim frame and display unit for the selector lever position - 2 - on the selector lever cover - 1 -






Installing

Install in reverse order.