Passenger Side Window Regulator Switch

Passenger Side Window Regulator Switch

Removing





- Switch off ignition and remove ignition key.

- Remove door trim. Refer to => [ Front Door Trim ] Front Door Trim.

- Remove insulation from door trim.

- Disconnect the connector - 1 -.

- Carefully release retaining hooks - arrows - with a small screwdriver.

- Remove window regulator switch - 2 - downward out of switch mount.

Installation

Installation is reverse of removal, but note the following:

- Press window regulator switch into switch mount until retaining hooks engage.

- Install door trim. Refer to => [ Front Door Trim ] Front Door Trim.