Driver Window Regulator Switches

Driver Window Regulator Switches

Removing






- Switch off ignition and remove ignition key.

- Remove front door trim.

- Detach insulating mat from door trim.

- Remove bolts - arrows - and remove the armrest.

- Unplug connector.






- Release fasteners on armrest side by pressing retaining element - arrows -.

- Use small screwdriver to carefully release fasteners - 2 - and - 3 - on trim side.

- Pull window regulator switch - 1 - downward out of the switch mount.

Installing

Install in reverse order of removal, noting the following:

- Press window regulator switch into switch mount until catches engage.

- Install front door trim.

Tightening Specifications