Airbag Unit Connector, Connecting

Airbag Unit Connector, Connecting

Connecting






Follow the safety precautions for pyrotechnic components.

- Remove driver side airbag unit. Refer to => [ Driver Airbag ] Driver Airbag.


Before handling pyrotechnical components (for example, disconnecting the connector), the person handling them must "discharge static electricity". For example, by briefly touching the door striker pin.

- Disconnect electrical connections - 2 - and - 3 - on airbag with screwdriver - 1 -.

Installation


• Follow the safety precautions for pyrotechnic components.

• Before handling pyrotechnical components (for example, connecting electrical connector), the person handling them must "discharge static electricity". For example, by briefly touching the door striker pin.

Installation is reverse of removal, but note the following:

• Ensure that electrical connections are pushed in as far as stop and engage with a click.

- Install driver side airbag unit. Refer to => [ Installing ] Driver Airbag.