Glow Plug System: Service and Repair

Automatic Glow Time Control Module (J179)

Removing

- Turn the ignition and remove the ignition key.

- Remove cover - 1 - from above battery, by pressing the release button - arrow -.






- Remove the battery.

- Remove battery holder - arrows -.






- Unhook the front of the battery carrier from the air guide.

- Pull out the relay carrier under engine compartment E-box - arrow -.






- Remove the automatic glow time control module - 1 - from the relay carrier under the engine compartment E-box.

Installing

Install in reverse order of removal.

- Install the battery.