5-Pin Relay Carrier

5-Pin Relay Carrier

Removing






- Switch off ignition and remove ignition key.

- Remove driver's storage compartment.

- Release retaining spring - 1 -.

- Move the 5-pin relay carrier in - direction of arrow - and remove toward right from base mount.

- Unclip fuse panel at 5-pin relay carrier.

- Detach relays and control modules and then unclip appropriate relay carrier.

• Check the exact assignment of 5-pin relay carrier in the current wiring diagram.

Installing

Install in reverse order of removal, noting the following:

- Install driver's storage compartment.