Front Door Trim

Front Door Safety Lights and Entry Lights

Removing





- Press in retaining tab - 1 - with a flat-head screwdriver and pry out door safety light or entry light - 2 -.

- Disconnect the connector - 3 -.

- To replace bulb cover, if present, carefully pry out on door safety light - arrow -.





- Remove bulb - 1 - (12 V 5 W) from socket - 2 - on rear side of door safety light or entry light.





Installation

Installation is reverse of removal, but note the following:

- If present, attach cover to door safety light.

- Connect electrical connector.

- Insert door safety light or entry light in opening and engage on opposite side.