Engine and S-Tronic Transmission, Separating

Engine and S-Tronic Transmission, Separating

Special tools, testers and auxiliary items required

• Special Hook (10 - 222 A /20)

• Bracket (2024 A /1), part of the Engine Sling (2024 A)

• Shop Crane (VAS 6100)

Procedure

• Engine/transmission assembly removed and mounted on engine/transmission support (T10012).

- Loosen the hose clamps - arrows - and remove the coolant hoses from the transmission fluid cooler.





- Attach the (2024 A) hooks to the transmission lifting eyes and secure it with the securing pin - arrow -.





- Attach the (VAS 6100) with the (10 - 222 A /20) to the lifting tackle.

- Free up the wiring harness - arrows - and the connector - 1 - on the bracket.





- Remove the bolts - 1 - and - 2 - and then remove the starter from the transmission.





- Remove the bolts - 1, 3, 5, 6, 7, 8, 9 and 10 - that connect the transmission to the engine.





• The bolt - 3 - is accessible only after the starter is removed.

• Ignore - 2 and 4 - and - A -.

- Remove transmission from engine.