Brake Caliper, FNRG57 Overview

Brake Caliper, FNRG57 Overview

• Install complete repair kit when servicing.

• Apply thin coat of lithium grease (G 052 150 A2) to brake cylinders, pistons and seals.






1 - Brake Carrier

• Bolt to brake caliper housing

2 - Guide Pins

• 30 Nm

3 - Caps

• Insert in bushing

4 - Protective cap

• Push onto bleeder valve

5 - Bleeder Valve

• 15 Nm

• Apply a thin coat of lithium grease (G 052 150 A2) to the threads before screwing in.

6 - Bushing

• Insert in brake caliper housing

7 - Brake Caliper Housing

• Brake caliper with a balance weight, refer to => [ Brake Caliper with Balance Weight ] Brake Caliper With Balance Weight

8 - Retaining Spring

• Observe correct installed position.

• Hook in at both brake caliper housing studs and at the outer brake pad retaining spring.

9 - Protective Cap

• Do not damage when installing piston

• Coat with lithium grease (G 052 150 A2)

10 - Pistons

• Apply thin coat of lithium grease (G 052 150 A2) to piston beforehand

11 - Seal

• Coat with lithium grease (G 052 150 A2)