Programming and Relearning

Radio, Symphony II+ in Transport Mode, Activating/Deactivating

Transport mode must be activated before removing/sending every "symphony II+" radio.

After activation, the internal CD changer drive is in transport position.

After replacing a "symphony II+", transport mode must be deactivated after installation.

Transport Mode, Activating

"Symphony II+" is connected and installed.

- Press station buttons 3 and 5 and TONE button at the same time.

After about 5 seconds, "TRANSPORT" appears on the radio display.

Transport Mode, Deactivating

"Symphony II+" is connected and installed.

- Press CANCEL button.

"TRANSPORT" display goes out.

Transport mode is deactivated.