All Wheel Drive Control Module (J492), Rear Final Drive 0BR, 0BS and 0BY (Haldex-Clutch Generation IV) Overview

All Wheel Drive Control Module (J492), Rear Final Drive 0BR, 0BS and 0BY (Haldex-Clutch Generation IV) Overview






1 All Wheel Drive (AWD) Control Module (J492)

• Is calibrated with Haldex clutch control valve (N373)

• Always replace together with valve

• Removing and installing, refer to => [ AWD Control Module (J492), Rear Final Drive 0BR, 0BS and 0BY (Haldex-Clutch Generation IV) ] AWD Control Module (J492), Rear Final Drive 0BR, 0BS and 0BY (Haldex-Clutch Generation IV)

2 Bolt

• 6 Nm

3 Cover

• Always replace

• With vulcanized seal

• Remains on the control module or on the Haldex clutch housing during removal

4 Haldex Clutch Control Valve (N373)

• Is calibrated with AWD control module

• Always replace together with control module

• Removing and installing, refer to => [ AWD Control Module (J492), Rear Final Drive 0BR, 0BS and 0BY (Haldex-Clutch Generation IV) ] AWD Control Module (J492), Rear Final Drive 0BR, 0BS and 0BY (Haldex-Clutch Generation IV)

5 Seal

• Always replace

• Make sure the centering lip fits correctly in the groove

• Coat with high performance Haldex clutch oil and insert

6 Seal

• Always replace

• Diameter 12 mm

• Coat with high performance Haldex clutch oil and insert

7 Seal

• Always replace

• Diameter 11 mm

• Coat with high performance Haldex clutch oil and insert

8 Seal

• Always replace

• Diameter 10 mm

• Coat with high performance Haldex clutch oil and insert