Determine Location of Problem

Determine Location of Problem

Special tools, testers and auxiliary items required

• Vehicle Diagnostic Tester

Procedure

It is very difficult to find the exact location of the problem. Replace the damaged fiber-optic cable and lay a new wire parallel to the defective fiber-optic cable.

• Select the damaged fiber-optic cable components with the "Guided Fault Finding" or "Guided Functions" from the vehicle diagnostic tester menu options.

• A fiber-optic cable that needs repair is represented by a "yellow" color.

- Connect the vehicle diagnostic tester and turn on the ignition.

- Select the following menu items:

• Guided Functions or Guided Functions

• GO TO

• Select Function/Component Selection

• Body

• Electrical Equipment

• 01 - OBD capable systems

• Ring Break Diagnosis

- Remove the affected components.

- Disconnect the connector from the components.

- Assemble the fiber-optic cable:

• Refer to => [ Assemble Fiber-Optic Cable with Fiber-Optic Cable Repair Kit ] Assemble Fiber-Optic Cable With Fiber-Optic Cable Repair Kit (VAS 6223)

• Refer to => [ Assemble Fiber-Optic cable with Fiber-Optic Cable Repair Kit ] Assemble Fiber-Optic Cable With Fiber-Optic Cable Repair Kit (Vas 6223A)