Electric Parking Brake Switch: Service and Repair

Parking Brake Switch






1 - Release Knob

2 - Trim, One-Piece

• Installation depends on equipment version.

3 - Left Trim

• Installation depends on equipment version.

4 - Parking Brake Switch

• For parking brake indicator light in instrument cluster.

5 - Right Trim

• Installation depends on equipment version.

6 - Cap

7 - Bolt

• 0.7 Nm

Removing

- Remove center console trim.

- Remove release knob - 1 -.

• Note different versions of parking brake trim.

- Release one-piece parking brake trim - 2 - and pull forward.

- Release handle on two-piece trim and pull forward.

- Remove two-piece parking brake trim.

- Unclip parking brake switch - 4 -.

- Disconnect electrical connector.

Installing

- Installation is performed in the reverse order of removal.

• After installing parking brake switch, parking brake must not be adjusted.