Convertible Top, Clean Working Conditions

Clean Working Conditions

Hydraulic oil damages paint. Immediately remove any hydraulic oil that has come in contact with painted surfaces.

• Clean connecting points and surrounding areas before loosening.

• Place removed parts on a clean surface and cover. Use foil and paper. Do not use cloths with lint!

• Carefully cover or seal opened components if the repair will not be done immediately.

• Only install clean parts: remove replacement parts from the packaging immediately prior to installation.

• Place collecting container or foil and cloths under connections to be opened so that hydraulic oil does not come into contact with painted surfaces.

• Seal open hydraulic lines with cover caps to prevent hydraulic oil from leaking out.