Seat Pan with Seat Cushion Extension Separating and Connecting

Seat Pan with Seat Cushion Extension Separating and Connecting

• The procedure description is based on a manual or power sport front seat and super sport seat.

Special tools, testers and auxiliary items required

• Upholstery clip pliers (V.A.G 1634)

Removing





- Remove the seat pan cover and cushion and the seat cushion extension. Refer to => [ Seat Pan with Seat Cushion Extension ] Seat Pan with Seat Cushion Extension.

- Unclip the retaining channels - 2 - from the catches - 5 -.

- Disengage the cover from the tabs - 4 - on both sides.

- Remove the support with the seat cushion extension upholstery - 3 - from the cover - 1 -.

- Remove the cover - 1 - from the upholstery - 3 - as far as possible.





- Remove the contour strip - 4 - from the clips - 2 -.

- Cut through the upholstery clips - 3 - using pliers - 4 -.





- Remove the cover - 1 - from the cushion - 2 -.

Installation

Installation is reverse of removal, but note the following:

- When installing new upholstery clips, use upholstery clip pliers (V.A.G 1634).