Stop Buffer, Convertible Top Compartment Cover Locking Motor and End Plate Assembly Overview

Stop Buffer, Convertible Top Compartment Cover Locking Motor and End Plate Assembly Overview






1 Hinge

• For the convertible top compartment cover

• Assembly overview, refer to => [ Hinge and Hydraulic Cylinder Assembly Overview ] Hinge and Hydraulic Cylinder Assembly Overview

2 Bolt

• 8 Nm

3 Bracket

• for the adjusting buffer

• Removing and Installing, refer to => [ Side Adjusting Buffer Bracket ] Side Adjusting Buffer Bracket

4 Side Adjusting Buffer

• Removing and Installing, refer to => [ Side Adjusting Buffer ] Side Adjusting Buffer

• Adjusting, refer to => [ Convertible Top Compartment Cover, Adjusting ] Convertible Top Compartment Cover, Adjusting

5 Convertible Top Compartment Cover Inner Section

• Assembly overview, refer to => [ Stop Buffer, Convertible Top Compartment Cover Locking Motor and End Plate Assembly Overview ]

6 Center Adjusting Buffer

• Removing and Installing, refer to => [ Center Adjusting Buffer ] Center Adjusting Buffer

7 Striker

• Removing and Installing, refer to => [ Striker ] Striker

8 Bolt

• 8 Nm

9 Bolt

• 21 Nm

10 Convertible Top Compartment Cover Locking Motor (V222)

• Removing and Installing, refer to => [ Convertible Top Compartment Cover Locking Motor ] Convertible Top Compartment Cover Locking Motor

11 Bolt

• 21 Nm