Parking Aid, Front Parking Aid Sensor

Front Parking Aid Sensor

Removing





Outer Sensor

- Remove the front wheel housing liner..

- Press both retainer tabs to the side - arrows - and press the sensor - 2 - through, from the outside towards the inside.

- Disconnect the electrical connector - 1 - on the sensor.

Inner Sensor





- Reach through the openings in the radiator grille behind the mounts and press both retaining tabs to the side - arrows - while pressing the sensor - 2 - through from the outside to the inside.

- Disconnect the electrical connector - 1 - on the sensor.

Installing

Install in reverse order of removal, observing the following:

Outer Sensor

- Install the front wheel housing liner..