Rear Body Acceleration Sensor

Rear Body Acceleration Sensor

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1783)

Removing

- Remove the luggage compartment floor covering and the compressor on the left side.

- On vehicles with 3 rows of seats, remove 3rd row.

- Disconnect connector - 3 -.






- Remove screw - 1 - and Rear Body Acceleration Sensor - 2 -.

Installing

Installation is performed in the reverse order of removal. Observe the following when doing so:

- Install sensor bolt - 1 - and tighten to 8 Nm.

- On vehicles with 3 rows of seats, install 3rd row.

- Check the body acceleration signal. Refer to => [ Body Acceleration Sensor, Checking Acceleration Signal ] .