Outer 2nd Row Three-Point Seat Belt Overview

Outer 2nd Row Three-Point Seat Belt Overview


Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components General Safety Precautions ] .






1 Bolt

• 55 Nm

• If three-point seat belt is being removed for accident repairs, replace screw.

2 Belt Anchor

• The anchor depression - arrow A - must rest on the anti-twist mechanism - arrow B -.

3 Bolt

• 55 Nm

• In delivery casing.

• If 2nd row outer three-point seat belt is being removed for accident repairs, replace screw.

4 Belt Roller/Belt Tensioner

• Removing and installing, refer to => [ Three-Point Seat Belt, Outer 2nd Row ] .

• Belt tensioner is not present on all vehicles.

5 Belt Tensioner Connector

• Removing and installing, refer to => [ Three-Point Seat Belt, Outer 2nd Row ] .

6 Belt Webbing

7 Belt Guide

• Removing and installing, refer to => [ Belt Guide, Rear (2nd Row) ] .

8 Belt Height Adjustment

• Removing and installing, refer to => [ Seat Belt Height Adjuster, Rear (2nd Row) ] .

• Function test, refer to => [ When checking function, following conditions must be fulfilled: ] .

9 Bolt

• 21 Nm

• If the seat belt height adjuster is being removed for accident repairs, replace the screw.

10 Belt Relay

• Belt relay must swing by itself in carrier direction after tightening screw.

11 Bolt

• 55 Nm

• If belt relay is being removed for accident repairs, replace screw.

• Belt relay must swing by itself in carrier direction after tightening screw.

12 C-pillar Trim

13 Belt Height Adjustment Slide