Supercharger Ribbed Belt Tensioner

Supercharger Ribbed Belt Tensioner

Removing






- Remove the compressor ribbed belt. Refer to => [ Supercharger Ribbed Belt ] Supercharger Ribbed Belt.

- Remove the bolt - 1 - and remove the ribbed belt tensioner - 2 -.

• Ignore (T10060 A).

Installing

Install in reverse order, paying attention to the following:

• Tightening specification, refer to => [ Supercharger Ribbed Belt Drive Overview ] Supercharger Ribbed Belt Drive Overview.

- Install the supercharger ribbed belt, refer to => [ Supercharger Ribbed Belt ] Supercharger Ribbed Belt.