Instrument Panel Covers On Driver Side Overview

Instrument Panel Covers On Driver Side Overview






1 Left Mount

• Driver side lower instrument panel cover.

2 Connector, 16-pin (T16)

• Diagnostic connector.

3 Right Mount

• Driver side lower instrument panel cover.

• Clipped into accelerator pedal module.

4 Bolt

• Tightening specification - 1.4 Nm

5 Threaded Clip

• Quantity: 2

6 Upper Instrument Panel Cover, Driver Side

• Identified as knee bar.

• Removing and installing, refer to => [ Upper Instrument Cover, Driver Side Knee Bar ] Upper Instrument Cover, Driver Side Knee Bar.

7 Clips

• Quantity: 2

• Before installing the upper instrument panel cover on the driver side, the knee bars must be installed in the cut-outs in the instrument panel.

• Note location. Refer to => [ Installation Position ] Upper Instrument Cover, Driver Side Knee Bar.

8 Bolt

• Tightening specification - 1.4 Nm

9 Footwell Light

10 Driver Side Lower Instrument Panel Cover

• Removing and installing, refer to => [ Instrument Panel Cover, Lower Driver Side ] Instrument Panel Cover, Lower Driver Side.