EGR Pipe and Catalytic Converter

EGR Pipe and Catalytic Converter

Removing

- Remove the bolt - arrow - on the preliminary catalytic converter strap.






- Carefully pull the engine cover - arrows - off the 4 bolts one after the other.






- Remove the bolts - 1 - and - 2 - and then remove the heat shield from the turbocharger.






- Remove the nuts - arrows -.






- Remove the preliminary catalytic converter from the turbocharger and push it toward the rear.

- Remove the bolts - 2 - and - 3 - and remove the exhaust gas recirculation pipe.






- Remove the bolts - 1 - and - 4 - and remove the exhaust gas recirculation pipe.

Installing

Install in reverse order of removal. Note the following:

• For the correct tightening specifications, refer to => [ Exhaust Gas Recirculation Overview ] Exhaust Gas Recirculation Overview.

- Install primary catalytic converter. Refer to => [ Primary Catalytic Converter ] Primary Catalytic Converter.