Shift Indicator - A/T: Service and Repair

Selector Lever Transmission Range Position Display Unit with Selector Lever Scale Illumination

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing





- Pull the parking brake button to lock the electro-mechanical parking brake.

- Shift the selector lever into the S position.

- Switch ignition off.

- Carefully pry the selector lever boot out at the side using a (3409) or a small screwdriver - arrows -.

- Fold selector lever boot upward.

- Release retaining spring - 2 - and remove Selector Lever Transmission Range Position Display (Y26) - item 1 - - arrow -.





- Disconnect the electrical connector.

Installation

Install in reverse order.