Left Instrument Panel Fuse Panel

Left Instrument Panel Fuse Panel

Removing

- Switch the ignition off.

- Disconnect the battery ground (GND) cable from the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the left instrument panel fuse panel C (SC). Refer to => [ Fuse Panel C with Left Instrument Panel Fuse Panel ] Fuse Panel C With Left Instrument Panel Fuse Panel.

• Remove the driver side top instrument panel cover if necessary.

- Remove the fuses from the fuse panel.






- Release retaining clips in the direction of the - arrows - and remove the cover from the fuse panel.

- Remove connector retaining strip - 1 - in the direction of the - arrow - and remove connectors from plug-in socket.






• Check the exact assignment for left instrument panel fuse panel in the applicable wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install the left instrument panel fuse panel C. Refer to => [ Fuse Panel C with Left Instrument Panel Fuse Panel ] Fuse Panel C With Left Instrument Panel Fuse Panel.

- Connect battery. Required actions, refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.