FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2011 >> Q5 Quattro (8RB) L4-2.0L Turbo (CAEB) >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Relay Carrier and Fuse Carrier, Passenger Compartment >> Interior CAN Cut-Off Connector

Interior CAN Cut-Off Connector







Interior CAN Cut-Off Connector

Removing

- Switch off ignition and remove ignition key.


Danger of unintended engine ignition.

Turn off the ignition and remove the ignition key from the vehicle interior for all work performed on the high voltage vehicle.

- Remove the lower left A-pillar trim panel..

- Press retaining tabs - 1 - and release retainer in the direction of the - arrow -.






- Remove the interior CAN cut-off connector (T46i) - 2 -.

• For the exact assignment of the interior CAN cut-off connector, see the applicable wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install the lower left A-pillar trim panel..

pro multis Credits:Operation CHARM About Operation CHARM