Front Door Striker: Service and Repair

Striker Pin

Removing





- Remove the bolts- 2 - and the striker pin - 1 -.

Installation

• Tightening specifications, refer to=> [ Striker Pin, Door Lock and Door Opener Actuating Link Assembly Overview ] Front Door Striker Pin, Door Lock and Door Opener Actuating Link Assembly Overview.

Installation is performed in the reverse order of removal:

• The striker pin backing must be position with the pins - arrows - exactly in the hole.

• The striker pins must be sheared off cleanly after sliding the striker pin.

• If a new part is being installed, then remove the sheared off pins from the striker pin.

•

- Adjusting striker pin, refer to => [ 3. Adjusting with Striker Pin ] Adjustments