Multimedia Control Head

Multimedia Control Head

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

- Switch off all electrical consumers.

Removing

Vehicles with automatic transmission:

- Switch on ignition.

- Place the selector lever in the S position.

- Switch off ignition.

All Vehicles:

- Remove the ignition key.

The multimedia control head (E380) is fastened - 1 - with springs in the center console - arrows -.





- Remove the A/C controls - 1 -.





- Unlock the springs - arrows - with the (3409) and lift the multimedia control head - 3 - upward out of the center console.

Be careful of the short wires to the multimedia control head, the electro-mechanical parking brake button (E538) and the access/start authorization button (E408).

- Disconnect the connectors on the rear side of the multimedia control head (E380).

Remove the electro-mechanical parking brake button and the access/start authorization button.

Installing

- Install in reverse order.