02EA (S-Tronic) Transmission, Selector Mechanism Through 11.09

Connectors on Selector Mechanism, Checking

Determine the cause of the fault using Guided Fault Finding before servicing or checking the connector using the vehicle diagnostic tester.

Check all the control modules for faults stored the Diagnostic Trouble Code (DTC) memories and erase them if necessary before checking the connectors using the vehicle diagnostic tester.






A 10-pin connector for connecting wires from the selector mechanism to the transmission (with CAN bus lines)
B 4-pin connector to the shift lock solenoid (N110) and selector lever park position lock switch (F319)
C 10-pin connector to selector mechanism cover