Transmission, Securing In Engine/Transmission Holder

Transmission, Securing in Engine/Transmission Holder

Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Holding Fixture (VW 313) or

• Engine and Transmission Holder (VAS 6095)

• Shop Crane -Load Cap=700-1200KG (VAS 6100)

• Transmission Support (VW 353)

• Holding Fixture (VW 540)

Attach Transmission Horizontally






- Attach the transmission to the (VW 540) - arrows -.

- Install the transmission using the (VAS 6100) in (VW 313) or (VAS 6095).

There is a risk the transmission could swing around when it is turned on the (VW 313).

• Because center of gravity is located outside the holding fixture center of rotation, a second technician must hold the transmission housing to rotate.

There is a risk of oil leaking when turning the transmission.

• Vents for the transmission housing must be closed before turning a filled transmission on the engine/transmission stand so that the oil pan faces upward.

Secure Transmission in Vertical Position






- Mount the transmission to the (VW 353) and insert the (VW 309) into the (VW 313) or the (VAS 6095).