FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Brake Pedal and Mounting Bracket Overview






Brake Pedal and Mounting Bracket Overview

The path of the brake pedal must not be shortened via extra floor mats.

Lubricate all bearing and contact surfaces with lubricant part no. Lubricant (G 000 450 02).






1 - Mounting Bracket for Pedal Assembly

Illustration for vehicles with automatic transmission.

Removing and Installing, Manual Transmission, refer to => [ Mounting Bracket, Manual Transmission ] Mounting Bracket, Manual Transmission.

Removing and Installing, Automatic Transmission, refer to => [ Mounting Bracket, Automatic Transmission ] Mounting Bracket, Automatic Transmission.

2 - Sleeve

3 - Brake Pedal Axle

4 - Bearing Pin

5 - Right Securing Clip (Spring Steel)

Refer to the Parts Catalog.

6 - Washer

7 - Gas Pedal Module Bolt

8 Nm

8 - Accelerator Pedal Module

9 - Pedal Support Bolt

20 Nm

10 - Brake Lamp Sensor

Removing and Installing, refer to => [ Brake Lamp Sensor ] Service and Repair.

11 - Mounting Pin Bolt

The bolt holds the mounting pins in position.

8 Nm

12 - Left Securing Clip (Spring Steel)

Refer to the Parts Catalog.

13 - Brake Pedal

Removing and Installing, Manual Transmission, refer to => [ Brake Pedal, Manual Transmission ] Brake Pedal, Manual Transmission.

Removing and Installing, Automatic Transmission, refer to => [ Brake Pedal, Automatic Transmission ] Brake Pedal, Automatic Transmission.

If possible, leave the brake pedal stop installed; it could break the mount for the brake lamp sensor if the brake pedal is released too quickly.

14 - Ball Socket Formed in Mount

For the ball head on the brake booster push rod.

15 - Mount

For the ball head on the brake booster push rod.

With ball stud retaining tabs.

Removing and Installing, refer to => [ Brake Booster Plunger Mount ] Brake Booster Plunger Mount.

16 - Nut

8 Nm

17 - Stop

If possible, leave the brake pedal stop installed; it could break the mount for the brake lamp sensor if the brake pedal is released too quickly.

18 - Grommet

Installed only vehicles with an automatic transmission.