Left and Right Convertible Top Compartment Enclosure Switches

Left and Right Convertible Top Compartment Enclosure Switches

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)

Removing





- Open the convertible top until the displayed position of the top and the convertible top compartment cover is reached.

- Support the convertible top with a suitable wood stick.

- Remove both pins from the expanding studs in the convertible top compartment enclosure switch using the pry lever (80 - 200) - 1 - - arrows -.





- Open the flap in the luggage compartment side trim panel.





- Unclip and disconnect the convertible top compartment enclosure switch connector - arrow - on the back side of the luggage compartment side trim panel.

- Remove the convertible top compartment enclosure switch.

Installation

Further installation is performed in reverse sequence of removal, but observe the following:

• Ensure that electrical connections are pushed in as far as stop and engage with a click.