Striker

Striker

Removing





- Open the convertible top until the displayed position of the top and the convertible top compartment cover is reached.

- Remove the screws - 1 - and - 3 - end plate - 2 -.





Installation

• Tightening specifications, refer to => [ Stop Buffer, Convertible Top Compartment Cover Locking Motor and End Plate Assembly Overview ] Stop Buffer, Convertible Top Compartment Cover Locking Motor and End Plate Assembly Overview.

Installation is reverse of removal, but note the following:

- Install the end plate.

• The round side - arrow - on the end plate faces upward.

- Adjust the end plate. Refer to => [ Convertible Top Compartment Cover, Adjusting ] Convertible Top Compartment Cover, Adjusting.