Convertible Top Compartment Cover Seal

Convertible Top Compartment Cover Seal

Removing





- Remove the outer and inner window shaft strips. Refer to => [ Outer/Inner Window Shaft Strip ] .

- Remove the bolt - 4 -.

- Pull the convertible top compartment cover seal - 3 - off the body seam - arrows -.

Installation

• Tightening specifications, refer to => [ Convertible Top Compartment Cover Seal Assembly Overview ] Convertible Top Compartment Cover Seal Assembly Overview.

Installation is reverse of removal, but note the following:

- The front side of the small seal - 1 - must be line up with the seam - 2 - in the body panel.

- Install the outer and inner window shaft strips. Refer to => [ Outer/Inner Window Shaft Strip ] .