Convertible Top Compartment Cover Emergency Release

Convertible Top Compartment Cover Emergency Release

Removing





- Left: Remove the left bracket for the convertible top compartment enclosure..

- Right: Fold the convertible top compartment enclosure forward and remove the right luggage compartment trim panel..

- Free up the wiring harness - 4 - on the convertible top compartment cover emergency release.

- Open the clips - arrows - and remove the convertible top compartment open switch - 3 - from its mount.

- Remove the screws - 2 - and remove the convertible top compartment cover emergency release - 1 -.

Installation

• Tightening specifications, refer to => [ Hinge and Hydraulic Cylinder Assembly Overview ] Hinge and Hydraulic Cylinder Assembly Overview.

Installation is reverse of removal, but note the following:

- Left: Install the left bracket for the convertible top compartment enclosure..

- Right: Fold the convertible top compartment enclosure forward and install the right luggage compartment trim panel..