Convertible Top Compartment Cover Locking Motor

Convertible Top Compartment Cover Locking Motor

Removing





- Open the convertible top until the displayed position of the top and the convertible top compartment cover is reached.

- Disconnect electrical harness connector - 1 -.





- Remove the screws - arrows - and remove the convertible top compartment cover locking motor - 2 -.

Installation

• Tightening specifications, refer to => [ Stop Buffer, Convertible Top Compartment Cover Locking Motor and End Plate Assembly Overview ] Stop Buffer, Convertible Top Compartment Cover Locking Motor and End Plate Assembly Overview.

To install, perform the steps used in removal in reverse order.