Needle Bearings, Removing From Crankshaft and Installing

Needle Bearings, Removing from Crankshaft and Installing

Only for Vehicles Equipped with a S-Tronic Transmission

Special tools, testers and auxiliary items required

• Puller (T10055) with Adapter (T10055/3)

• Centering Mandrel (3176) or Drift (VW 207 C)

• Extractor for example: Kukko Extractor 14.5-18.5 mm (21/2)

Removing

- Remove with standard puller, for example (21/2) - arrow -, (T10055/3) and (T10055).






Installing

• Side of needle bearing with writing on it must be readable when installed.

- Drive in using (VW 207 C) or (3176).






Installation depth dimension - a - = 2 mm