Rear Final Drive 02D and 0AV, Checking Gear Oil Level

Rear Final Drive 02D and 0AV, Checking Gear Oil Level

Special tools, testers and auxiliary items required

• Torque Wrench 5-50 Nm (V.A.G 1331)

• To check axle oil level, vehicle must be level.

• For the transmission fluid specification for rear final drive, refer to the Electronic Parts Catalog (ETKA).

- Remove oil filler plug - arrow - to check axle oil.






• Specified value: The oil level is correct when the rear final drive is filled up to the lower edge of the filler hole. Add axle oil if necessary.

- Screw in the plug - arrow - and tighten.

Tightening Specifications