Engine Controls - MIL ON/DTC's 2968/P2015

24 08 42

2019223/1

November 6, 2008





Vehicle Information

Condition

01 MIL on (DTC 2968 P2015 in ECM)

- DTC 2968 (P201500 [236] Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Sporadic) is stored in the ECM without MIL on.

- DTC 2968 (P201500 [236] Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Sporadic) is stored in the ECM with MIL on.

Technical Background

Intake manifold tumble flaps sporadically stick.

Engine performance is not affected.

Production Solution

Production countermeasure implemented.

Service

Audi of America is requesting your cooperation in supplying us with technical information regarding intake manifold tumble flap concerns.

Audi of America is requesting that the following procedure be followed:

1. Verify DTC 2968 (P201500 [236] Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Sporadic) is stored in memory.

2. If the vehicle is within the New Vehicle Limited Warranty, contact Audi Technical Assistance Center (TAC) before proceeding.

Please attach DTC and Diagnostic Log to TAC contact.

Warranty

This TSB is informational only and not applicable to any Audi warranty.

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.