Rear Seat LATCH Child Seat Anchorage Assembly Overview

Rear Seat LATCH Child Seat Anchorage Assembly Overview

Backrest Child Seat Anchor (LATCH)






1 Right backrest shell

• Assembly Overview, refer to => [ Backrest Frame and Panel Assembly Overview ] Backrest Frame and Panel Assembly Overview

• Removing and Installing, refer to => [ Backrest Panel ] Backrest Panel

• Taped on the front side and on the upper edge with two-sided tape

• Rear side cover with adhesive film

• With top tether

2 Left backrest shell

• Assembly Overview, refer to => [ Backrest Frame and Panel Assembly Overview ] Backrest Frame and Panel Assembly Overview

• Removing and Installing, refer to => [ Backrest Panel ] Backrest Panel

• Taped on the front side and on the upper edge with two-sided tape

• Rear side cover with adhesive film

• with top tether

3 Bolt

• For the correct tightening specifications, refer to => [ Backrest Frame and Panel Assembly Overview ] Backrest Frame and Panel Assembly Overview

• Quantity: 16

4 Backrest frame

• To replace backrest frame, remove left and right backrest shell

• Assembly Overview, refer to => [ Backrest Frame and Panel Assembly Overview ] Backrest Frame and Panel Assembly Overview

• Removing and Installing, refer to => [ Backrest Frame ] Backrest Frame

• Optional equipment:

• With child seat anchor (LATCH)

• Without child seat anchor

5 Double sided adhesive tape

• Attach to front side and upper edge of backrest shell

LATCH Child Seat Anchorage, Removing and Installing

The LATCH child seat anchorage is welded to the backrest frame. To remove and install the child seat anchor, backrest frame must be removed and replaced.

Child seat anchor (LATCH), removing and installing, refer to => [ Backrest Frame and Panel Assembly Overview ] Backrest Frame and Panel Assembly Overview