Flush-Bonded Windows

Flush-Bonded Windows

Special tools, testers and auxiliary items required

• Cutting tool kit (VAS 6452)

• Wire spool (VAS 6452/1)

• Cutting tool kit wire (VAS 6452/2)

• Suction Lifter (V.A.G 1344)

• Cutting Tools For Glass (V.A.G 1351)

• Pull Handle (V.A.G 1351/1)

• Window Cutter (V.A.G 1561A)

• Angled Blade (V.A.G 1561/10)

• Universal Cutting Blade (V.A.G 1561/11)

• Scraper (15+25 mm) (V.A.G 1561/7+8)

• Cartridge Gun (V.A.G 1628)

• Cartridge Heater (V.A.G 1939A)

Adhesive Sealant, Removing from Window

Using Adhesive remover (D 002 000 10) is recommended. Always follow the safety precautions when using adhesive remover.

When cleaning from vehicle interior out, the window just installed must not be pressed outward.

Paint Surfaces

- Clean the painted surface with a dry cloth. Clean off any dirt with Adhesive remover (D 002 000 10).

Plastic Trim

- Allow the adhesive sealant to harden (approximately 1 hour) and then peel it off.