Diagram 64/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Starter, Generator (GEN), Starter Relay, Starter Relay 2, Battery Jump Start Terminal





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

B - Starter

C - Generator (GEN)

C1 - Voltage Regulator (VR)

J53 - Starter Relay Overview Of Relay

J533 - Data Bus On Board Diagnostic Interface Overview Of Control Modules

J695 - Starter Relay 2 Overview Of Relay

T2 - Double Connector, black, on generator

T10f - 10-Pin Connector, red, connector station electronics box plenum chamber

T17d - 17-Pin Connector, white, connector station electronics box plenum chamber Overview of Connector Stations

T20 - 20-Pin Connector, black, on data bus on board diagnostic interface

TV22 - Terminal 30 Wire Junction 2

U6 - Battery Jump Start Terminal

(13) - Ground Connection (in engine compartment, right)

(18) - Ground Connection (on engine block)

(B177) - Connection (61) (in interior wiring harness)

(D51) - Plus Connection 1 (15) (in engine compartment wiring harness)

(D97) - Connection (50) (in engine compartment wiring harness)

* - Through May 2009

** - from June 2009

# - Relay and fuse carrier electronics box plenum chamber

Previous Diagram 64/2 (Tracks 1-14)

Next Diagram 64/4 (Tracks 29-42)