Diagram 64/25 (Tracks 323-336)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Auxiliary Fuel Pump, Fuel Level Sensor, Transfer Fuel Pump (FP)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G - Fuel Level Sensor Locations

G1 - Fuel Gauge

G6 - Transfer Fuel Pump (FP) Locations

G169 - Fuel Level Sensor 2 Locations

J285 - Instrument Cluster Control Module Overview Of Control Modules

J832 - Auxiliary Fuel Pump Relay Overview Of Relay

T2ci - Double Connector, black, in left engine compartment

T4l - 4-Pin Connector, black, on left fuel container

T4m - 4-Pin Connector, black, on right fuel container

T32a - 32-Pin Connector, grey, on instrument cluster control module Locations

V393 - Auxiliary Fuel Pump Locations

Y24 - Display Unit in Instrument Cluster

(61) - Ground Connection (on left C-pillar) Locations

(62) - Ground Connection (on right C-pillar)

(410) - Sensor Ground Connection 1 (in main wiring harness)

(D118) - Connection 16 (in engine compartment wiring harness)

* - Output Sensor

** - Relay and fuse carrier electronics box plenum chamber

# - Through May 2009

## - from June 2009

### - Not applicable, phased-in

Previous Diagram 64/24 (Tracks 309-322)

Next Diagram 64/26 (Tracks 337-350)