Diagram 64/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Reducing Agent Metering System Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G684 - Reducing Agent Tank Sensor Locations

G685 - Reducing Agent Temperature Sensor Locations

J623 - Engine Control Module (ECM) Overview Of Control Modules

J880 - Reducing Agent Metering System Control Module Locations

T4am - 4-Pin Connector, black, on reducing agent tank sensor

T10f - 10-Pin Connector, red, connector station electronics box plenum chamber

T17e - 17-Pin Connector, brown, connector station electronics box plenum chamber Overview of Connector Stations

T30 - 30-Pin Connector, black, on reducing agent metering system control module

T60 - 60-Pin Connector, black, on engine control module (ECM) Locations

V436 - Reducing Agent Transfer Pump Locations

Z102 - Reducing Agent Tank Heater Locations

Z104 - Reducing Agent Wire Heater Locations

(77) - Ground Connection (on left lower B-pillar) Locations

(366) - Ground Connection 1 (in main wiring harness)

(B565) - Connection 32 (in main wiring harness)

Previous Diagram 64/20 (Tracks 253-266)

Next Diagram 64/22 (Tracks 281-294)