Sunroof / Moonroof Weatherstrip: Service and Repair

Sunroof Seal

Special tools, testers and auxiliary items required

• Application roller for door insulation foil (3356)

- To remove, remove seal all around from roof opening

Seal, installing





- Before installing seal, remove adhesive residue if necessary.

- Adhesion surface must be free of dust and grease.

- Clean adhesion surface thoroughly with Cleaning Solution (D 009 401 04).

- Center seal so joint is at center of front roof opening.

- Remove protective film from adhesive tape left of joint.

- Position seal on flange and at the same time, press it on past radius.

- Remove protective film from adhesive tape in sections and press seal on.

- Press seal on evenly to prevent any excess length.

- Press seal on firmly and evenly with a roller, running it all around 2 times.