Through VIN 8E_8A 002699

Shift Lock Solenoid

Removing

- Remove cover for shift mechanism. Refer to => [ Selector Mechanism Cover ] Selector Mechanism Cover.

- Disconnect electrical harness connector on Shift Lock Solenoid (N110).





- Release logs and remove the shift lock solenoid ( N110) - arrows -.

Installing

Install in reverse order, paying attention to the following:

- Press shift lock solenoid into guide until it engages; operating lever - 2 - of solenoid must engage in locking lever - 1 - on shift mechanism.





- Install cover for shift mechanism. Refer to => [ Selector Mechanism Cover ] Selector Mechanism Cover.

- Check shift lock solenoid (N110) function. Refer to => [ Selector Mechanism, Checking ] Procedures.