Door Lamps and Switches

Mirror Adjustment Switch

Removing





- Remove the driver door trim.

- Remove the screws - arrows - on the pull handle for closing on back side of door trim.

- Remove panel for pull handle for closing on front side, under mirror adjustment switch.

- Disconnect electrical harness connector - 1 - at mirror adjustment switch - 2 -.





- Carefully release catches - arrows - using a small screwdriver.

- Pull out mirror adjustment switch downward from pull handle for closing.

Installing

Install in reverse order of removal, observing the following:

• When installing, make sure that symbol panel is inserted in front of mirror adjustment switch.

- Press mirror adjustment switch into switch mount until catches engage.

- Install the driver door trim.